Toyota Prius Maintenance Light Reset by Generation and Display
8 min read · by Ryan Caldwell · Last updated: November 5, 2026
The Toyota Prius maintenance light reset clears the service reminder after oil maintenance is done, but the button or menu steps depend on your model year and display. The sections below cover each generation.
Toyota’s 2026 Prius owner’s manual gives the official menu steps. Steps for older generations come from owner reports, and each is labeled. If the light stays on after two tries, see a dealer.
What the Prius maintenance light tells you
Toyota recommends scheduled maintenance every 5,000 miles or six months, whichever comes first, according to its 2023 Prius Warranty and Maintenance Guide. The maintenance light is the reminder that this service is due, so it is the reason for any Toyota Prius maintenance light reset. A reset that follows the service keeps the reminder accurate for the next visit. Toyota’s 2026 manual lists two separate reminders, so a Toyota Prius maintenance light reset can mean either the scheduled maintenance message or the oil maintenance data.
The same guide says to check the engine oil level once a month and to replace the oil and filter regularly. It also says neglected oil can cause oil starvation or oil gelling, and that damage from this is not covered by the New Vehicle Limited Warranty. The guide leaves the oil viscosity to the owner’s manual.

Confirm the service is done before you reset
Run the Toyota Prius maintenance light reset only after the oil and filter service is finished, because the reset clears the reminder and does not do the service. A reset done too early hides a service that is still due, so check these points first.
- The oil and filter change is finished, and the receipt shows the date and mileage.
- You know the odometer reading, since Toyota’s 5,000 mile rule depends on mileage.
- You know your model year and display type, because the reset steps differ by both.
- Your owner’s manual is nearby so you can check the maintenance section before you start.
Toyota’s 2023 guide asks owners to keep records with the date of service, the mileage and a description of the work. It also says a service provider other than a Toyota dealership does not, by itself, cause a warranty claim to be denied, so keep an independent shop’s receipt as your record.
The 2026 owner’s manual adds two cautions for work you do yourself. It says to turn the hybrid system off and make sure there is adequate ventilation before maintenance checks, and it warns that do-it-yourself maintenance may affect warranty coverage. It recommends Toyota repair manuals for that work, so finish the service first and run the Toyota Prius maintenance light reset last.
Owner-reported Toyota Prius maintenance light reset for 2005 and 2006 models
Owners of 2005 and 2006 Prius models report an ignition and ODO button sequence for the maintenance light, and one 2006 owner confirmed it worked. Toyota’s documents checked for this guide do not include these steps, so treat them as owner-reported.

Each step below comes from one owner’s written sequence. Do the steps in order, and stop if the display does not match the description, because the sequence may belong to a different year or display.
- Turn the ignition to ON and confirm the display shows the odometer.
- Turn the ignition OFF.
- Hold the ODO button and turn the ignition back ON.
- Keep holding ODO until the maintenance light flashes and then goes off, and release the button.
- Wait until the display shows zeros and returns to the odometer.
A common failure is a display set to TRIP instead of ODO. One owner said the reset failed until the button was switched to ODO, so check the display mode before you repeat the steps.
Owner-reported menu resets for the 2015 Prius v
A 2015 Prius v owner reported a Settings menu path, Maintenance System and then Yes, and a second poster confirmed the same path on that car. Forum reports show different menus for the Prius v and Prius Prime, so do not assume the path applies to every variant. Prius Prime owners should check their own menu before trying any path from a Prius v report.
Toyota Prius maintenance light reset steps for the 2026 Prius
Toyota’s 2026 Prius hybrid owner’s manual gives the official Toyota Prius maintenance light reset steps for that car: use the steering wheel meter control switches and the Vehicle Settings menu on the multi-information display, after the required maintenance is done.
Reset the scheduled maintenance message
- Press the up or down meter control switch on the steering wheel and select the settings icon on the display.
- Select Vehicle Settings, then press and hold OK.
- Select Scheduled Maintenance and press OK.
- Select Yes and press OK.
Reset the oil maintenance data after an oil change
- Press the meter control switches and select the settings icon on the multi-information display.
- Select the vehicle settings icon, then press OK.
- Select Oil Maintenance and press OK.
- Select Yes and press OK.
The manual lists the messages the system shows. “Maintenance Required Soon” comes on about 4,500 miles (7,200 km) after the last reset, and “Maintenance Required Visit Your Dealer” comes on about 5,000 miles (8,000 km) after it. The manual adds that the indicator does not work properly unless the message has been reset.
“Oil Maintenance Required Soon” means the oil change should be scheduled, and the manual says to reset the message after the oil is changed. “Engine Maintenance Required Visit Your Dealer” is different: it means an engine part is malfunctioning, so have the car inspected right away. Third-party guides describe a similar Settings path for earlier cars, but this guide did not confirm it for any model year other than 2026.
When the Toyota Prius maintenance light reset will not take
If the light stays on after the steps, the reset usually did not take. Forum reports point to the display mode, the ignition mode or a dealer-level fix, and one 2014 Prius v owner said the dealer could not clear the light after an oil change. Work through these checks for your Toyota Prius maintenance light reset before you assume the car has a fault.
- On a 2026 Prius, confirm you chose the menu item that matches the message on your display, since the manual lists Scheduled Maintenance and Oil Maintenance as separate items.
- On older cars, confirm the display mode the steps name, such as ODO rather than TRIP.
- Confirm the ignition mode the steps call for, since one report says the sequence did not work in another mode.
- Check that the oil and filter service is recorded, so the reminder is not due for a different reason.
- Ask a dealer or qualified technician to check the light if it returns.
Where to confirm the reset steps for your Prius
The owner’s manual for your exact model year is the reference to follow when it differs from a forum post. In the 2026 manual, the section is titled Resetting the message indicating maintenance is required, and the index lists it under maintenance reminders. The 2023 guide linked above also says the full Owner’s Manual holds the details for each vehicle system.
Use the manual for your own car, because the Toyota Prius maintenance light reset steps change between generations and page numbers differ by year. Other Toyotas differ too, as the Toyota Camry maintenance light reset by model year and the Toyota Corolla maintenance light reset guide show. The manual points to a separate Scheduled Maintenance Guide or Owner’s Manual Supplement for service intervals.
Frequently Asked Questions
Can I do a Toyota Prius maintenance light reset without a scan tool?
Yes. Toyota’s 2026 manual uses the steering wheel meter control switches and the Vehicle Settings menu, and the owner-reported older methods use the dash buttons and the ignition. None of these sources call for a scan tool.
Does resetting the light change my oil?
No. A Toyota Prius maintenance light reset clears the reminder only, and the oil and filter service is a separate job. Keep the service record with the date and mileage, so you know when the next reminder should come.
Why does the light come back after a reset?
The Toyota Prius maintenance light reset may not have taken, or the service may still be due. Check the display mode and the ignition mode the steps call for, then repeat the toyota prius maintenance light reset steps for your model. If the light returns, confirm your service record and ask a dealer to check it.
Are the reset steps the same for every Prius generation?
No. The reset differs by model year and display, so the older ODO method and the 2026 Vehicle Settings menu do not match. Match the steps to your car, and treat any model not listed here as unconfirmed.
When should I see a dealer or technician?
Toyota recommends an authorized dealer for maintenance. See a dealer or qualified technician if the light stays on after the steps, or if your service record does not match the light.
Before you start a Toyota Prius maintenance light reset, write down your model year and display type, then use the matching section above. If none of the methods fit your car, the owner’s manual or a Toyota dealer is the next step.
-
Ryan Caldwell, Vehicle Research Editor at BestOBD2Picks Ryan cross-references manufacturer data, NHTSA records, and owner reports to show which scan tools and procedures fit your specific vehicle. Vehicle Research Editor